Monitor S1 Service Instructions

S1: Monitor Battery Replacement

  • May 23, 2017 // Modified 7 years ago

Step 1- Remove screws (2) fastening the Battery Cover at the rear of the monitor as shown.

 

Step 2– Remove the Battery Cover as shown.

 

Step 3- Remove the Batteries as shown.

 

Step 4– Replace the Batteries as shown.

Step 5- Replace the Battery Cover as shown

 

Step 6- Replace the screws (2) fastening the Battery Cover at the rear of the monitor as shown.

Related Articles

  • Series 3: Rubber Feet Replacement

    Step 1- Locate the two sets of indentation guides on the bottom of the wooden rail. A:The rear rubber feet indentations are approximately 3 1/2” from the back of each...

  • S1: Recoil Belt Replacement (Clip On Recoil)

    For Video Instructions, click here: Replacing the Recoil Belt Step 1- Remove the handle from the handle rests and place the handle in the full forward position Step 2- Stand...

  • Series 3: Oilite Bearing Replacement

    Step 1- Remove the Handle from the handle rests and place the handle in the full forward position. Step 2- Stand the WaterRower upright and disconnect the bungee from the...

  • Series 2: Heelrest Replacement (Bolt on)

    Step 1.  Remove the Footstrap bolts and Footstrap. Step 2.  Replace the Footstrap bolts and Footstrap.