Monitor Series 4 Service Instructions

Series 4: Monitor Battery Replacement

  • Apr 27, 2017 // Modified 7 years ago

Step 1- Remove screws (2) fastening the Battery Cover at the rear of the monitor as shown.

 

Step 2– Remove the Battery Cover as shown.

 

Step 3- Remove the Batteries as shown.

 

Step 4– Replace the Batteries as shown.

Step 5- Replace the Battery Cover as shown

 

Step 6- Replace the screws (2) fastening the Battery Cover at the rear of the monitor as shown.

Related Articles

  • M1: Extrusion Replacement

    Step 1.  With the 5mm Allen key, unscrew the seat stops. There are two on the front and back of each rail. Step 2.  Peel the old extrusion off the...

  • M1: Footstrap Replacement

    You will need a 5mm allen wrench and a 13mm wrench. Step 1.  Remove old strap. Step 2.  Use the 5mm allen key and 13mm wrench to remove clamp and...

  • S1: Recoil Bushing Replacement

    Handle Removal Step 1- Remove the handle from the Handle rests and place the Handle in the full forward position.   Step 2- Stand the WaterRower upright and disconnect the...

  • M1: Monitor Board Replacement

    Step 1- Remove screws (2) fastening the battery cover at the rear of the monitor as shown. Step 2– Remove the Battery Cover as shown. Step 3- Remove the Battery...