S1 Service Instructions

S1: Single Bungee Replacement

  • May 23, 2017 // Modified 7 years ago

For Video Instructions, please see the following link:
Replacing the S4 Bungee Assembly

Step 1- Remove the Handle from the handle rests and place the handle in the full forward position.

Step 2- Stand the WaterRower upright and disconnect the bungee from the Recoil Belt as shown.

Step 3- Remove the Bungee from the Rear Spacer and reattach the replacement bungee as shown.

 

Step 4- Reconnect the Bungee to the Recoil Belt as shown.

Related Articles

  • Series 4: Rail Extrusion Removal

    *These instructions are made for all wooden WaterRower models. This includes the Natural, Club, Oxbridge and Classic models. Step 1- With the 5mm Allen Key, unscrew the seat stops. There...

  • M1: Bungee Replacement

    Step 1- Remove the handle from the handle rests and place the handle in the full forward position. Step 2- Disconnect the bungee as shown. Step 3- Remove the bungee...

  • S1: Monitor Sensor Disk Replacement

    Sensor Disk Replacement: View a video for this Step 1– Remove the Handle from the handle rests and place the handle in the full forward position as shown.   Step 2- Stand...

  • Series 4: Top Deck Replacement

    For instructions on how to replace the Top Deck on your WaterRower, check out these service instructions.