Series 2 Service Instructions

Series 2: Heelrest Replacement (Bolt on)

Step 1.  Remove the Footstrap bolts and Footstrap.
Step 2.  Replace the Footstrap bolts and Footstrap.

Related Articles

  • Series 4: Recoil Belt Replacement (Clip On Recoil)

    For Video Instructions, click here: Replacing the Recoil Belt Step 1- Remove the handle from the handle rests and place the handle in the full forward position Step 2- Stand...

  • S1: Rail Extrusion Replacement

    Step 1.  With the 5mm Allen key, unscrew the seat stops. There are two on the front and back of each rail. Step 2.  Peel the old extrusion off the...

  • S1: Monitor Sensor Disk Alignment

    If your S4 monitor is flashing zeros and not counting down, there is one simple check you can do that may solve the problem. You can check the position of...

  • Series 4: HiRise Adapter Instructions

    Step 1 – Stand the WaterRower upright. Step 2 – Using a Phillip’s head screwdriver, remove all 16 Rail Bumpers and Rail Bumper screws from underneath the rails. Step 3 – Attach...