Series 4 Service Instructions

Series 4: Dolley Wheel Replacement

  • May 18, 2017 // Modified 7 years ago

Step 1- Assemble the Dolley Wheel to the rail in the sequence shown.

Related Articles

  • Series 2: Handle Replacement (Bolt on)

    Step 1.  Remove the Handle from the handle rests and place the handle in the full forward position. Step 2. Pass the drive strap around the large pulley and underneath...

  • M1: Short Tank Assembly Replacement

    1. Remove the handle from the handle rests and place in the full forward position. 2. Stand the WaterRower upright and disconnect the bungee. 3. Lay the WaterRower down and pull...

  • A1/GX: Seat Replacement

    Step 1.  Stand the Indo-Row machine up and unclip the bungee cord. Step 2.  Using the 5mm Allen Key, undo the 2 back rear leg bolts. Step 3.  Using the...

  • S1: Recoil Bushing Replacement

    Handle Removal Step 1- Remove the handle from the Handle rests and place the Handle in the full forward position.   Step 2- Stand the WaterRower upright and disconnect the...