1. Home
  2. Knowledge Base
  3. WaterRower Hybrid
  4. Hybrid - Footboard
  5. Hybrid Series – Footboard: How to replace the foot strap
Searching...

Hybrid Series – Footboard: How to replace the foot strap

Replacement of the Foot Strap on your Hybrid Series rower’s footboard is simple and the process is identical for any Hybrid Series rower. Follow the steps below.

You will need a pair of scissors and a Phillips screw driver.

A person using scissors to cut a foot strap on a Hybrid Series rower's footboard.

Step 1

Using a pair of scissors, cut away the current foot strap.

A person using a Phillips screwdriver to attach a foot strap to a hybrid series rower's footboard.

Step 2

Unscrew the 2 screws on the right of the footboard.

A close-up image of a person adjusting the foot strap of a Hybrid Series rower's footboard, showing the strap and footboard's interface.

Step 3

Lift the foot pad up and pull out the current foot strap.

A person holding a black foot strap with a metal buckle against a wooden rower's footboard.

Step 4

Slide the sewn end of the foot strap into the slot, making sure the buckle is facing upwards (teeth facing upwards).

A person is attaching a foot strap to a Hybrid Series rower's footboard, demonstrating the process with hands holding the strap.

Step 5

Lift up the foot pad and place the tab underneath it.

Close-up of a foot strap slot on a Hybrid Series rower footboard, with a black woven strap inserted.

Step 6

Loop remaining strap through the other slot.

Close-up of a person using a Phillips screwdriver to unscrew a foot strap on a rowing machine footboard.

Step 7

Re-screw the foot pad back into place.

A person adjusting a foot strap on a rower's footboard, demonstrating how to thread the strap through a buckle.

Step 8

Re-thread the strap through the buckle.

Tagged:
Was this article helpful?
Yes No

Related Articles