The black rubber feet on the rails and rear leg of your Hybrid Series rower may wear or crack with heavy use and age. Replacement of the feet is simple and the process is identical for any Hybrid Series rower. Follow the steps below.
Step 1
Stand the rower up on end.
Step 2
Using a Phillips screwdriver or a screw gun with a Phillips bit, remove the old rail feet and attaching screws.
Note: It may be easier to access the rear leg’s feet by standing on a chair.
Step 3
Install the new rail feet and screws. When securing them to the rail or rear leg, tighten the screw just enough that the foot cannot rotate by hand. Do not overtighten as the feet will compress and not sit evenly.