1. Home
  2. Knowledge Base
  3. WaterRower Original
  4. Original - Tank
  5. Original Series – Tank: How to replace the bungee
Searching...

Original Series – Tank: How to replace the bungee

Replacing the bungee on your Original Series rower is a very simple task to perform.

The process and video below are applicable to all Original Series rower models.

Diagrama que muestra el mecanismo de conexión del bungee en un WaterRower, con una flecha que indica la dirección de conexión.

Step 1

Remove the handle from the handle rests and place the handle in the full forward position.

Diagram of a WaterRower showing the bungee and recoil belt with directional arrows indicating movement.

Step 2

Stand the WaterRower upright and disconnect the bungee from the recoil belt as shown.

Diagram showing the components of a bungee system for a rowing machine, including a hook, a rod, and a rectangular base with attachment points.

Step 3

Using the 5mm Allen Key located in the bungee pod (where it is mounted), remove the Bungee from the Rear Spacer and install the replacement bungee as shown.

Illustration of a WaterRower showing the bungee and recoil mechanism with up and down arrows indicating movement.

Step 4

Reconnect the Bungee to the Recoil Belt as shown.

Tagged:
Was this article helpful?
Yes No

Related Articles