1. Home
  2. Knowledge Base
  3. WaterRower Original
  4. Original - Monitor
  5. Original Series – Monitor: How to replace the batteries (S4 and S4 Bluetooth Monitors)
Searching...

Original Series – Monitor: How to replace the batteries (S4 and S4 Bluetooth Monitors)

Replacing the batteries on Original Series rowers equipped with either the S4 Monitor or S4 Bluetooth Monitor is simple. You’ll need 4 AA batteries (use alkaline, not rechargeable ones) and a Phillips screwdriver.

Illustration showing the battery cover of a rowing machine monitor with labeled screws for removal.

Step 1

Remove screws (2) fastening the Battery Cover at the rear of the monitor as shown.

Illustration showing the rear of a monitor with the battery cover highlighted and an arrow indicating the location of screws.

Step 2

Remove the Battery Cover as shown.

Diagram of the S4 Monitor showing the battery cover with an arrow indicating the removal direction.

Step 3

Remove the Batteries as shown. Pay attention to how the batteries are oriented inside of the monitor while doing so.

Illustration showing the location of 4 AA batteries in a monitor.

Step 4

Replace the Batteries as shown, in the same orientation as the batteries removed in Step 3.

Diagram showing the location of the Battery Cover on an S4 Monitor, with an arrow indicating the screws to be removed.

Step 5

Replace the Battery Cover as shown.

Illustration showing the rear view of a monitor with two screws indicated for removing the battery cover.

Step 6

Replace the screws (2) fastening the Battery Cover at the rear of the monitor as shown.

Tagged:
Was this article helpful?
Yes No

Related Articles