Replacing the bungee on your Metallic Series rower is a very simple task to perform.
The process and video below are applicable to all Metallic Series rower models, past and current.
Step 1
Remove the handle from the handle rests and place the handle in the full forward position.
Step 2
Stand the WaterRower upright and disconnect the bungee from the recoil belt as shown.
Step 3
Using the 5mm ratchet included with your rower, remove the Bungee from the Rear End Pad and install the replacement bungee as shown.
Step 4
Reconnect the Bungee to the Recoil Belt as shown.